Replacing Your Roof With Metal Shingles for a Longer-Lasting Roofing Solution
If you want to have a longer-lasting roofing solution, you might want to use metal. Metal shingles are an excellent choice for replacing old asphalt materials. The following information will help you replace your roof with a durable metal shingle roofing solution:
Tearing Off Old Roofing for Metal Shingles
Before the metal shingles can be installed, the old shingles must be torn off. Once the old materials are removed, you will be ready to do the repairs that are needed. If you are installing metal shingles, there are a few things that will help, which include:
- Strip down to the roof decking
- Repair decking and make sure it sits perfectly flat
- Use modern synthetic underlayments instead of asphalt felt paper
Repair any problems with the roof to prepare your home for the installation of metal shingles. You may want to make changes to the roof to prepare for the installation of new metal roofing.
Changes That Will Prepare for Metal Shingles
You may want to make specific changes to the roof of your home to prepare for metal shingles. The main thing that you want to do is to make sure there are not any water traps. Therefore, you may want to add small roof changes that improve the watershed to prevent water traps. Doing these changes will help prevent problems that can cause serious damage and leaks on metal roofs.
Rubber Flashing Reinforcements for Metal Shingles
There are some areas of metal shingle roofs that are more vulnerable to damage. These areas of metal roofs that are more vulnerable to wear and leaks include:
- Front porches with changes in the roof slope
- Second-floor walls or chimneys that butt against the roof
- Valleys where changes in roof slopes cause water traps
These are the areas of metal shingles roofs that are more vulnerable to wear and leaks. You want to make sure these areas have the right flashing and reinforcement. There are rubber flashing materials that are made specifically to reinforce metal roofs in these areas.
Installation of the Metal Shingles for Custom Finishes Where Needed
The installation of the metal shingles is the last step in the process. The installation of the metal materials will be a little different than asphalt shingles. Some of the differences in metal shingles include:
- Installing the starter shingles at eaves and edges of gables
- Roofing the main body of the roof with interlocking metal shingles
- Finishing ridges, hips, valleys, and gables with specially formed shingles
Once the first run of shingles is installed, the metal materials are installed much like asphalt roofing. Special shingles are cut and bent to finish the job after the main body has been roofed. Some metal shingle products are available with finishes for areas like hips and ridges that have been pre-bent.
Metal shingles are a great choice to replace your old asphalt roofing. Call a roof replacement service and talk to them about using stamped metal shingles for your home.